Shank Adapter,Drill rod,DTH hammer and bits,Tophammer bit,Casing pipe,Tricone bit,Core bit.

PRODUCTS
JESSIN ROCK DRILL CO.,LIMITED
Tel: +86-(0)731-85778491
Fax: +86-(0)731-85778492
Mobile:+86-15364024561
Skype: jessin-dthhammer
jessinhammer@163.com
http://www.dthhammer-js.com
PRODUCTS
Your present position:Home> PRODUCTS>Eccentric Casing System

 Eccentric Casing System ( Eccentric Overburden Drilling System)

ODEX
JESSIN produces the ODEX Eccentric Overburden Drilling System, starting with the ODEX90 to ODEX445. This three -piece system comprises of pilot bit, reamer,guide device. JESSIN ODEX overburden drilling systems are widely used in a variety of applications from well drilling and mining to rock anchoring and site investigation. 

Futures:
- Rapid removal of cuttings; High penetration rate, especially in resistant rock formation;
- Easy soil and groundwater sampling during drilling;
- Possible to measure yield estimate at selected depth in the formation;
- Advantageous in unconsolidated formations with a high risk of caving
 
Application Range:
It is suitable for drilling water wells, geothermal wells, short mirco piles ,medium mini-type grouting hole of building,dam and harbour project. 
1. When drilling starts , the reamer swings out and reams the pilot-hole wide enough for the casing tube to slide down behind the drill bit assembly 
2. When the required depth is reached , rotation is reversed carefully, whereupon the reamer swings in , allowing the drill bit assembly to be pulled up through the casing. 
3. Casing tubes that are to be left in the drill hole should be sealed at the bottom of the hole by means of cement grout or some other sealing agent.
 4. Drilling continues to the desired depth in the bedrock using a conventional drilling. 

 

【Return to previous page】【Close this page】
ABOUT US|PRODUCT|CONTACT USTECHNICAL SUPPORT :WEB155.NET
Search Key: COP44,DHD44,SD4, QL40, Mission40
Tel: +86-(0)731-85778491 Fax: +86-(0)731-85778492
Mobile:+86-15364024561 E-mail: jessinhammer@163.com