Shank Adapter,Drill rod,DTH hammer and bits,Tophammer bit,Casing pipe,Tricone bit,Core bit.

PRODUCTS
JESSIN ROCK DRILL CO.,LIMITED
Tel: +86-(0)731-85778491
Fax: +86-(0)731-85778492
Mobile:+86-15364024561
Skype: jessin-dthhammer
jessinhammer@163.com
http://www.dthhammer-js.com
PRODUCTS
Your present position:Home> PRODUCTS>Anchor Rod

Full threaded steel self drilling rock bolt  /  hollow anchor bar  / anchor rods 

 

 

The Self Drilling Anchor system is comprised of a hollow threaded anchor bar with a sacrificial drill bit that performs drilling, anchoring and grouting in a single operation. Self drilling anchor system is mainly used in slope stabilization, tunneling pre-support, foundations with micro piles etc projects.

Advantages and Characteristics as below:

1. No casings required, because anchor bars can be drilled into loose soils without needing casings to support the boreholes.

2. Fast drilling and installation, because drilling, installation and grouting are in a single operation.

3. Both rope threads and trapezoid threads are robust and ideal for rotary-percussive drilling and ensuring a high level of bond with the borehole gout.

4. The hollow core not only serves for flushing during drilling, but also for grouting after drilling.

5. Continuous threads ensure the bars can be cut and coupled at any point, or extended.

6. Different anchor bits are available for different ground conditions.

R thread anchor bar or called rock bolt, soil nail, which is a kind of threaded hollow bar, bar surface with an rope thread according to ISO 10208 & 1720. It was firstly invented by MAI on 1960S to solve the low construction speed on complicated underground works, nowadays; it is very popular all around the world.

 

 

 

 

Size

O.D(mm)

I.D(mm)

Ultimate Load(KN)

Yield Load(KN)

Weight(kg/M)

R25N-14

25.0

14.0

200

150

2.3

R32L-22

32.0

22.0

210

160

2.8

R32N-21

32.0

21.0

280

230

2.9

R32N-18.5

32.0

18.5

280

230

3.4

R32S-17.5

32.0

17.5

360

280

3.5

R32S-15

32.0

15

360

280

4.1

R38N-21

38.0

21.0

500

400

4.8

R38N-19

38.0

19.0

500

400

5.5

R51L-38

51.0

38.0

550

450

6.0

R51L-36

51.0

36.0

550

450

7.6

R51N-36

51.0

36.0

800

630

7.6

R51N-33

51.0

33.0

800

630

8.4

Steel grade

Acc. to EN10083-1

Thread direction

Left hand

Thread standard

ISO 10208 / ISO1720

 
【Return to previous page】【Close this page】
ABOUT US|PRODUCT|CONTACT USTECHNICAL SUPPORT :WEB155.NET
Search Key: COP44,DHD44,SD4, QL40, Mission40
Tel: +86-(0)731-85778491 Fax: +86-(0)731-85778492
Mobile:+86-15364024561 E-mail: jessinhammer@163.com